SuperServer 2028TP-HC1FR

Product Description

Key Features

Fourhot-pluggablesystems (nodes) in a 2U form factor. Each node supports the following:

1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v4^†/ v3 family; QPI up to 9.6GT/s

2. Up to 2TB^† ECC 3DS LRDIMM , up to
    DDR4- 2400^†MHz ; 16x DIMM slots

3. 1x PCI-E 3.0 x16 slot

4. Single port IB (FDR, 56Gbps),
    w/ QSFP connector

5. Intel® i350-AM2 Dual port GbE LAN

6. Integrated IPMI 2.0 with KVM and
    Dedicated LAN

7. 6x 2.5" Hot-swap SAS/SATA HDD
    Bays

8. Broadcom 3108 SAS3 controller (6 ports);
    RAID 0, 1, 5, 6, 10, 50, 60

9. 2000W Redundant Power Supplies

Product SKUs   SYS-2028TP-HC1FR SuperServer 2028TP-HC1FR (Black)   Motherboard (Four per System)   Super X10DRT-PIBF   Processor/Cache (per Node)   CPU Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) Cores / Cache Up to 22 Cores† / Up to 55MB† Cache System Bus QPI up to 9.6 GT/s Note † BIOS version 2.0 or above is required Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.   System Memory (per Node)   Memory Capacity 16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM Memory Type 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors   On-Board Devices (per Node)   Chipset Intel® C612 chipset Infiniband Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller SAS Broadcom 3108 SAS3 (12Gbps) controller;    RAID 0, 1, 5, 6, 10, 50, 60 support Optional SuperCap IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics ASPEED AST2400 BMC   Input / Output (per Node)   SAS 6x SAS3 (12Gbps) ports LAN 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port Infiniband 1x external QSFP Infiniband connector USB 2x USB 3.0 ports total (2x rear) VGA 1x VGA port Serial Port / Header 1x Fast UART 16550 port / 1 Header (internal) Others 1x SATADOM support on the motherboard

Chassis   Form Factor 2U Rackmount Model CSE-217HQ+-R2K04B   Dimensions and Weight   Width 17.25" (438mm) Height 3.47" (88mm) Depth 28.75" (730mm) Weight Gross Weight: 90 lbs (40.9kg) Net Weight: 72 lbs (32.7 kg) Available Colors Black   Front Panel   Buttons Power On/Off button UID button LEDs Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED   Expansion Slots (per Node)   PCI-Express 1x PCI-E 3.0 x16 Low-profile slot (Both CPUs need to be installed for full access to PCI-E slots)   Drive Bays (per Node)   Hot-swap 6x 2.5" Hot-swap SAS/SATA HDD trays   System Cooling   Fans 4x 8cm heavy duty PWM fans with optimal fan speed control   Power Supply (76mm Width) 2000W Redundant Power Supplies with PMBus Total Output Power 1000W: 100 – 127Vac 1800W: 200 – 220Vac 1980W: 220 – 230Vac 2000W: 230 – 240Vac 2000W: 200 – 240Vdc (UL/cUL only) Dimension (W x H x L) 76 x 40 x 336 mm Input 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only) +12V Max: 83.3A / Min: 0A (100-127 Vac) Max: 150A / Min: 0A (200-220 Vac) Max: 165A / Min: 0A (220-230 Vac) Max: 166.7A / Min: 0A (230-240 Vac) Max: 166.7A / Min: 0A (200-240 Vac) (UL/cUL only) +5Vsb Max: 1A / Min: 0A Output Type 27 Pairs Gold Finger Connector Certification   Titanium Level   [ Test Report ]   System BIOS   BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI   Operating Environment / Compliance   RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)