SuperServer F619P2-RT

Product Description

Key Features8 Hot-plug System Nodes in 4U
Each node supports:

1. Dual Socket P (LGA 3647) support
    2nd Gen Intel® Xeon® Scalable
    processors (Cascade Lake/Skylake)^‡

2. 12 DIMMs; up to 3TB 3DS ECC
    DDR4-2933MHz^† RDIMM/LRDIMM,
    Supports Intel® Optane™ DCPMM^††

3. Expansion slots: 1 PCI-E 3.0 x16 (LP)
    1 PCI-E 3.0 x16 (for SIOM )

4. 6 Hot-swap 2.5" SATA3 drive bays
    M.2 Interface: PCI-E 3.0 x4
    M.2 Form Factor: 2260, 2280, 22110
    M.2 Key: M-Key

5. SIOM Network card,
    1 dedicated IPMI LAN port

6. 1 VGA, 2 USB 3.0 ports

7. 3x 4cm 20k RPM middle fans

8. 2200W Redundant Power Supplies
    Titanium Level (96% Efficiency)

Product SKUs   SYS-F619P2-RT SuperServer F619P2-RT (Black)   Motherboard   Super X11DPFR-S   Processor (per Node)   CPU Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡, Dual UPI up to 10.4GT/s Support CPU TDP 70-165W with IVR Cores Up to 28 Cores Note ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)   System Memory (per Node)   Memory Capacity 12 DIMM slots Up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM†† Memory Type 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM Note † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.   On-Board Devices   Chipset Intel® C621 chipset SATA SATA3 (6Gbps); RAID 0, 1, 5, 10 Network Controllers Flexible networking via SIOM IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Graphics ASPEED AST2500 BMC   Input / Output (per node)   SATA 14 SATA3 (6Gbps) ports LAN SIOM flexible Network card 1 RJ45 Dedicated IPMI LAN port USB 2 USB 3.0 ports (rear) VGA 1 VGA port   System BIOS   BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS   Management   Software Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SuperDoctor® 5 Watch Dog Power Configurations ACPI Power Management   PC Health Monitoring   CPU Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator FAN Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment Thermal Control for fan connectors

Chassis   Form Factor 4U Rackmount Model CSE-F418BC2-R2K20BP   Dimensions and Weight   Width 17.63" (448mm) Height 6.96" (177mm) Depth 29" (737mm) Package 28.3" (W) x 15.0" (H) x 42.4" (D) Weight Net Weight: 150 lbs (68.04 kg) Gross Weight: 200 lbs (90.71 kg) Available Colors Black   Front Panel   Buttons Power On/Off button UID button LEDs Power status LED Hard drive activity LED Network activity LEDs Information LED (UID, Fan failure, Overheat)   Expansion Slots (per node)   PCI-Express 1 PCI-E 3.0 x16 (Low-profile) 1 PCI-E 3.0 x16 (SIOM)   Drive Bays (per node)   Hot-swap 6 Hot-swap 2.5" SATA3 drive bays M.2 M.2 Interface: PCI-E 3.0 x4 M.2 Form Factor: 2260, 2280, 22110 M.2 Key: M-Key   Backplane   1 SAS/SATA backplane   System Cooling (per node)   Fans 3x 4cm 20k RPM middle fans   Power Supply 2200W Redundant Power Supplies with PMBus Total Output Power and Input 1200W with Input 100-127Vac 1800W with Input 200-220Vac 1980W with Input 220-230Vac 2090W with Input 230-240Vac 2200W with Input 220-240Vac (for UL/cUL use only) 2090W with Input 230-240Vdc (for CCC only) AC Input Frequency 50-60Hz Dimension (W x H x L) 76 x 40 x 336 mm +12V Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 183.3A / Min: 0A (220-240Vac) 5VSB Max: 1A / Min: 0A Output Type Backplanes (gold finger) Certification   Titanium Level   [ Test Report ]   Operating Environment   RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature:    -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)

Parts List - (Items Included)
	Part Number	Qty	Description
Motherboard / Chassis	MBD-X11DPFR-S   CSE-F418BC2-R2K20BP	8   1	Super X11DPFR-S Motherboard   4U Chassis
Backplane	BPN-ADP-X11DPFR	8	Power distribution board for X11DPFR-S(N)
Backplane	BPN-SAS-F418-B6	8	6-port Fat Twin 6Gbps hot swappable HDD backplane (W/O SGPIO), support up to 6x 2.5-inch SAS/SATA HDD
Cable 1	CBL-0486L	16	2x2 to 2x2 15cm power cable HF. 18AWG
Cable 2	CBL-OTHR-0022L	8	20 to 20 pin cable for BPN-ADP-F418LS,7.5cm, 28AWG,RoHS/REACH,PBF
Cable 3	CBL-PWCD-0578	4	PWCD,US,IEC60320 C14 TO C13,3FT,14AWG
Cable 4	CBL-SAST-0616	8	MINI SAS HD-4 SATA,6G,INT,50CM,50CM SB,30AWG
Cable 5	CBL-SAST-1003-1	8	MINI SAS HD to 2X SATA,SB,INT,55 CM
Riser Card	RSC-RR1U-E16	8	RSC-RR1U-E16 with PIC-E x16 output
Heatsink / Retention	SNK-P0067PS	8	1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism
Heatsink / Retention	SNK-P0067PSM	8	1U Passive CPU Heat Sink with a 26-mm Wide Middle Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism
Power Supply	PWS-2K20A-1R	4	1U 2200W Redundant, Titanium, 76(W) X 40(H) X 336(L) mm

Optional Parts List
	Part Number	Qty	Description
Software	SFT-OOB-LIC •	1	OOB Management Package (per node license)
Software	SFT-DCMS-Single	1	DataCenter Management Package (per node license)