Product Description
Broadcom Ultra Low Power 25MBd Dual-channel, Bi-directional R2Coupler Optocoupler - SSO-12 - Surface-Mount - Tape-and-Reel - UL 5000 Vrms - 1000 Per Reel - ACFL-6213T-500E
The Broadcom ACFL-6213T is an ultra low power automotive-grade, dual-channel, bi-directional, high speed digital CMOS optocoupler. The device has two optocoupler channels internally aligned 180 degrees of each other, providing optimum chip pin-out configuration for bi-directional Tx/Rx data communication design and board layout. The two channels are electrically independent and galvanically isolated, providing an ideal isolated bi-directional power system communication interface.
The device is optimized for high-speed systems supporting data rates up to 25 MBd and packaged in a compact SSO-12 package comparable to the SSO-8 footprint.
Broadcom R2Coupler isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature industrial applications.
- Automotive Qualified per AEC-Q100 Grade 1 Test Guidelines
- Operating Temperature from -40 °C to +125 °C
- 5V CMOS compatibility
- 8.5mm Creepage and 8.3mm Clearance
- Data Rates up to 25 MBd
- Ultra Low LED Current Drive (IF): 0.8 to 2.3 mA
- Low Propagation Delay: 27 ns at IF = 2 mA (typical)
- Vcc Range: 3 to 5.5 V
- Compact, Auto-Insertable Stretched SO12 Package
- Worldwide Safety Approval:
- UL 1577, 5 kVRMS/1 minute
- CAN/CSA-C22.2 No. 62368-1
- IEC/EN 60747-5-5
Applications
- Automotive IPM driver for DC/DC converters and motor inverters
- Automotive CANBus and SPI communications interface
- High temperature digital signal isolation
- Power transistor isolation
- Digital isolation for A/D and D/A conversion