Cisco Wireless CW9179F Access Point - 4096 MB DRAM - 16 GB Storage Flash - 2x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45)

Cisco

Request A Quote

SKU:: HS-CIS-CW9179F
Condition:: New
Availability:: Vendor Direct Ship | ETA - Request A Quote | Email: sales@hssl.us | Call Us: +1 888 988 5472 |
Manufacturer Part Number:: CW9179F
Note:: Images may not be exact, please check specifications.
Required A Volume Purchase:: Contact us for a volume pricing | volumeorders@hssl.us

Overview
Other Details

Product Description

Cisco Wireless CW9179F Access Point - 4096 MB DRAM - 16 GB Storage Flash - 2x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45)

The Cisco Wireless CW9179F is the industry’s first enterprise-grade, Wi-Fi 7 certified high-density access point, made specifically for connecting large public venues. Connect every corner with this convertible indoor-outdoor unit, suitable for stadiums, arenas, festivals, airports, and anywhere where your audience needs reliable and high-performing connectivity. The CW9179F packs a lot of flexibility in an all-in-one integrated unit with software configurable beam patterns and coverage where you need it.

CW9179F is an access point for any large venue that requires the best in wireless performance. And with the ultimate flexibility of converting from indoor to outdoor, with multiple beam patterns and configurations, and using either on premises or cloud management, get the coverage you need, where and how you need it.

Specifications

Item

Specification

Part numbers

CW9179F Access Point

Software

Cisco IOS® XE Software Release 17.18.1 or later

Supported wireless LAN controllers

Catalyst 9800 Series Wireless Controllers (physical or virtual)

Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode

802.11be

4x4 + 4x4 uplink/downlink MU-MIMO with 4 spatial streams each (5 GHz)

4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6 GHz)

4096 QAM

Multilink operation

Preamble puncturing

Uplink/downlink OFDMA

TWT

BSS coloring

Maximal Ratio Combining (MRC)

20-, 40-, 80-, 160- and 320-MHz channels (6 GHz)

20-, 40-, 80-, and 160-MHz channels (5 GHz)

20-MHz channels (2.4 GHz)

PHY data rates: in Quad radio mode, up to 24 Gbps (4x4 320 MHz on 6 GHz, 4x4 + 4x4 160 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz); in Tri radio mode, up to 18 Gbps (4x4 320 MHz on 6 GHz, 4x4 160 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz) or PHY data rates up to 23 Gbps (4x4 320 MHz on 6 GHz, 4x4 160 MHz on 5 GHz and 4x4 160 MHz on 5 GHz)

Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)

802.11 Dynamic Frequency Selection (DFS)

Cyclic Shift Diversity (CSD) support

Wi-Fi Protected Access 3 (WPA3) support

802.11ax

4x4 + 4x4 uplink/downlink MU-MIMO with four spatial streams each (5 GHz)

4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6 GHz)

Uplink/downlink OFDMA 1024 QAM

TWT

BSS coloring MRC

802.11ax beamforming

20, 40, 80, and 160 MHz channels (5 and 6 GHz)

20 MHz channels (2.4 GHz)

PHY data rates up to 10.2 Gbps (4x4 160 MHz on 6 GHz, 4x4 + 4x4 80 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 DFS

CSD support WPA2/WPA3 support

802.11ac

4x4 + 4x4 downlink MU-MIMO with 4x4 spatial streams

MRC

802.11ac beamforming

20, 40, 80, and 160 MHz channels

PHY data rates up to 3.4 Gbps (dual 4x4 160 MHz on 5 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 DFS

CSD support WPA2/WPA3 support

802.11n version 2.0 (and related) capabilities

4x4 MIMO with four spatial streams MRC

802.11n and 802.11a/g beamforming 20- and 40-MHz channels

PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 DFS

CSD support

Integrated antenna

2.4 directional

5 directional

6 directional

IoT omnidirectional

GNSS omnidirectional

Peak Gain

6 dBi

12 dbi

12 dBi (boresight)

7 dBi (wide)

6 dBi

6 dBi (front)

3 dBi (back)

Interfaces

2x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45)

Management console port (RJ-45) with default speed of 115200 bps

LED Indicators

Front and back status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions
(W x L x H)

Access point (without mounting brackets):

18.7Wx 13.0Lx 2.9H in. (475mm x 330mm x 73mm)

Weight

AP Weight: 10.0 lb (4.54 kg)

Bracket Weight: 3.8 lbs (1.72 kg)

Input power requirements

802.3bt Cisco Universal PoE (Cisco UPOE®), 802.3at Power over Ethernet Plus (PoE+), 802.3af PoE (only for configuring staging, all radios off)

(Or) Cisco Power Injector – CW-INJ-8

Power Source	2.4 GHz radio	5 GHz radio	6 GHz radio	Link speed	Max PoE power consumption
802.3bt (Class 6) (UPOE)	4x4	4x4(LB) + 4x4(HB)	4x4	2x 10G	47W
802.3at (PoE+) (Quad Radio mode)	2x2	2x2 (LB) + 2x2 (HB)	2x2	2x 2.5 G	25.5W
802.3at (POE+) (Tri Radio Mode)	2x2	4x4 (FB)	2x2	2x 1G	25.5W
802.3af (PoE)	–	–	–	1x 1G	13.95W
Note: Actual power consumption may vary depending on access point usage. It is recommended that you ensure that Link Layer Discovery Protocol (LLDP)/Cisco Discovery Protocol is enabled to allow proper power negotiation. Note: FB is Full Band, LB is Lower UNII Bands (UNII 1 and 2) and HB is Higher UNII Bands (UNII 2E and 3). Note: Above power draw table starting with IOS-XE version 17.18.1

Power consumption

Power Source	Idle	Typical
802.3bt (UPOE)	TBD¹	TBD¹
802.3at (PoE+)	TBD¹	TBD¹
¹Note: Currently in testing, final power consumption to be determined.

Environmental

Note: When the ambient operating temperature exceeds 40˚C (104˚F), the access point will shift from 4x4 to 2x2 on the 2.4 GHz, 5 GHz, and 6 GHz radio(s).

Foreign Body / Water Ingress: IEC60529 IP65 / IP67 (with Outdoor Environment Pack CW-ACC- 9179-B-00 installed)

Wind resistance: up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts

Icing protection: MIL-STD-810F (0.5 in. (13mm)) Corrosion: NEMA 250 (600 hrs. salt)

Solar radiation: EN 60068-2-5 (753 W/m2)

System memory

4096 MB DRAM

16 GB storage flash

Available transmit power settings

2.4 GHz

17 dBm (50 mW)

-10 dBm (0.1mW)

5 GHz

17 dBm (50 mW)

-10 dBm (0.1 mW)

6 GHz

17 dBm (50 mW)

-10 dBm (0.1 mW)
Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.

Compliance standards

Safety:

IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex)

EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex)

UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex)

CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex)

AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex)

UL 2043

Class III equipment

Emissions:

CISPR 32 (rev. 2015) +AMD1:2019

EN 55032:2015/A11:2020

EN IEC 61000-3-2:2019/A1:2021

EN 61000-3-3:2013+A1:2019

AS/NZS CISPR32: 2015+AMD1:2020

47 CFR FCC Part 15B

ICES-003 (Issue 7, Class B)

VCCI-CISPR 32:2016

CNS 13438:2006 (95)

KS C 9832:2019

QCVN 118:2018/BTTTT

Immunity:

EN 55035:2017+A11:2020

KS C 9835:2019

Emissions and immunity:

EN 301 489-1 V2.2.3 (2019-11)

EN 301 489-17 V3.2.4 (2020-09)

QCVN (18:2014)

QCVN 112:2017/BTTTT

KS X 3124:2020

KS X 3126:2020

EN 61000-6-1:2019

EN 60601-1-2:2015+A1:2021

Radio:

EN 300 328 (v2.2.2)

EN 301 893 (v2.1.1)

EN 303 687 (v0.0.14, draft)

AS/NZS 4268 (rev. 2017)

47 CFR FCC Part 15C, 15.247, 15.407

RSP-100

RSS-GEN

RSS-247

LP0002 (109)

Japan Std. 66, and Std. 71

RF safety:

EN 50385:2017

AS/NZS 2772 (rev. 2016)

47 CFR Part 2.1091

RSS-102

IEEE standards:

IEEE 802.3

IEEE 802.3ab

IEEE 802.3af/at

IEEE 802.11a/b/g/n/ac/ax/be

IEEE 802.11h, 802.11d

Security:

802.11i (WPA2, WPA3)

802.1x/802.1x - SHA256

Enhanced Open/OWE

Advanced Encryption Standard (AES) - GCMP128, GCMP256 and CCMP256

Extensible Authentication Protocol (EAP) types:

EAP-Transport Layer Security (TLS)

EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

Protected EAP (PEAP) v0 or EAP-MSCHAP v2

EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

PEAP v1 or EAP-Generic Token Card (GTC)

EAP-Subscriber Identity Module (SIM)

Certifications

Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security

Bluetooth SIG: Bluetooth Low Energy

Datasheet

Other Details

(Manufacturer Standard Warranty) - Not Clear what product you need, or can't find your specific product/service part number? Call us +1 888 988 5472 | Fax: +1 888 920 3445. You can also use the quote request page

Product Videos

Custom Field

Manufacturer Part Number CW9179F

Note Images may not be exact, please check specifications.

Required A Volume Purchase Contact us for a volume pricing | volumeorders@hssl.us

Product Reviews

Write a Review

Cisco Wireless CW9179F Access Point - 4096 MB DRAM - 16 GB Storage Flash - 2x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45)

Product Description

Other Details

Product Videos

Custom Field

Product Reviews

Write a Review

Cisco

Cisco Wireless CW9179F Access Point - 4096 MB DRAM - 16 GB Storage Flash - 2x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45)

Recommended