Product Description
Ribbon Managed Packet Transport Edge Device • Uses Ribbon’s industry proven IP Wave rNOS operating system -NPT 1012D
The NPT 1012D is an extremely compact edge device supporting Ethernet, Circuit Emulation Services (CES) MPLS-TP and IP/MPLS. The NPT 1012D supports two form factors, a hardened DIN-rail form factor optimized for remote locations with strict environmental and size requirements. A rack mountable form factor which uses a special 19” rack adapter allowing 2 NPT 1012Ds to be mounted side-by-side. In both its hardened DIN-rail form factor, or its 19” rack mountable form factor it supports 32 Gbps switching capacity, this makes it a perfect fit for operators looking for a flexible fully managed packet transport edge device.
The NPT 1012D uses Ribbon’s industry proven IP Wave rNOS operating system to support Ethernet, IP/MPLS, MPLS-TP, segment routing and PON. The IP Wave rNOS streamlines multiservice networks by combining end-to-end service delivery with mission-critical grade assurance and control. With such a rich and robust feature set NPT 1012D is well suited for a wide variety of applications and networking scenarios. These include a gateway for mission-critical services, wholesale service delivery, and business VPN connectivity services. As with all of Ribbon’s NPT portfolio, NPT-1012 is managed by Ribbon’s Muse software suite.
- Hardened Din Rail Switch
- Compact Multiservice Edge
- Low Power
Packet
Switch: 32 Gbps Services: MEF CE2.0 (E-Line, E-LAN, E-Tree, E-Access) PN and VPN based Ethernet and IP, MPLS-TP Traffic Interfaces: 4 x 10/1GE (SFP+), 4 x 100/1000 Base-T (RJ45)
TDM
Services: CES (SAToP, CESoP SN) 4x E1/T1 (per smart SFP), 4 x STM-16/OC-48 (per smart SFP)
WDM
Colored C/DWDM, Tunable G.709
Timing & Syncronization
Built-in GNSS receiver, SyncE with ESMC, 1588v2, External timing 1PPS and TOD, Internal Stratum 3 clock (holdover state), Primary and secondary sources (supports SSM bits), ACR, DCR, loop timing on SAToP, and SNTP
Protection & Restoration
RSTP/MSTP, G.8032 Ethernet Ring Protection (ERP), MPLS-TP FRR, 1:1 Linear protection, PW Redundancy (PWR), multi segment-PW, IEEE 802.3ad Ethernet Link Aggregation (LAG) with LACP, Multi-chassis LAG (MC-LAG) Aggregation (LAG) with LACP, Multi Chassis LAG (MC-LAG)
OAM
Ethernet OAM - IEEE802.3ah; IEEE 802.1ag and ITU-T Y.1731 PM, IP OAM - BFD, Ping, Trace-route, TWAMP ; MPLS-TP OAM - G8113.2, RFC5860, BFD ; MPLS OAM – Ping/Traceroute MPLS; RFC 2544 Generator, Y.1564; LLDP; DHCP Relay; Streaming Telemetry; sFlow ; Link Delay-Measurement
Traffic Management
Traffic classification (based on Port, VLAN, Port+VLAN, IEEE 802.1p and DSCP), diffserv based TM, network Connection Admission Control (CAC), 8 Classes of Service (CoS)
Topologies
Mesh, dual homing , multi-ring, ring, star, linear
Security
Control-plane and management plane protection, Authentication, Authorization, and Accounting (AAA), RADIUS , Terminal Access Controller Access-Control System Plus (TACACS+), Secure Shell (SSH), Layer 2 and Layer 3 ingress Firewall filters (ACL) ,Unicast Reverse Path Forwarding (Unicast RPF), IEEE802.1x