Supermicro Add-on Card - Compact and Powerful dual-port 25 Gigabit Ethernet Adapter - AOC-C25G-I2S

Product Description

The Supermicro AOC-C25G-I2S 25 Gigabit Ethernet Adapter is one of the most compact and scalable 25G Ethernet adapters for today's demanding data center environments. Based on the latest Intel® network controller E810-XXVAM2, it addresses the demanding needs of the next-generation data center. The AOC-C25G-I2S is designed in a proprietary and small MicroLP form factor to fit Supermicro MicroCloud 8/10-node systems.

FEATURES

• Dual 25GbE SFP28 Connectors, backwards compatible 10GbE
• MicroLP Form Factor
• PCI-E 4.0 x8, backward compatible to PCI-E 3.0 x8
• Intel E810-XXVAM2 Ethernet Controller
• NC-SI for remote management
• RoHS compliant 6/6

SPECIFICATIONS

• General
• Intel E810-XXVAM2 Ethernet Controller
• MicroLP Form Factor
• Dual SFP28 ports
• PCI-E 4.0
• Application Device Queues (ADQ)
• Dynamic Device Personalization (DDP)
• Host Interface
• PCI-E v4.0
• Backward compatible with PCIe v3.0
• Message Signal Interrupt (MSI-X)
• Networking Features
• Jumbo Packet (9K Max)
• Teaming
• Virtual LANs 802.1q VLAN tagging
• Stateless Offload Features
• TCP, UDP, IPv4, IPv6 checksum offload
• Large Send Offload
• Receive Segment Coalescing
• TCP segmentation Offload (TSO)
• UDP Segment Offload (USO)
• Large Segment Offload (LSO)
• Receive Side Scaling (RSS)
• Virtualization Features
• VXLAN
• NVGRE
• Geneve
• SR-IOV
• 768 Virtual Station Interface (VSI)
• 8 Physical Functions (PF)
• Microsoft VM Queue
• VMWare NetQueue
• DPDK Support
• QoS: Priority-based Flow Control (802.1Qbb)
• Enhanced Transmission Selection (802.1Qaz)
• Manageability
• Network Controller Sideband Interface (NC-SI)
• Asset Management with Thermal Sensors
• RDMA over Converged Ethernet (iWARP and RoCE)
• iWARP
• RoCEv2
• Data Center Bridging
• Remote Boot
• UEFI PXE Boot
• Data Center Bridging
• Enhanced transmission – IEEE 802.1Qaz
• Priority based Flow Control – IEEE 802.1Qbbb
• Edge Virtual Bridging - IEEE 802.Qbg
• Power Savings
• ACPI Compliant power management
• Pass through Energy Efficient Ethernet (IEEE802.3az-2010)
• Cables Support
• SFP28 Direct Attach Copper cables
• Fiber-optic cables (with required optional SFP28 transceivers)
• Power Consumption
• Maximum power consumption: 10.5W
• Operating Conditions
• Storage temperature: -40°C to 70°C (-40°F to 158°F)
• Storage humidity: 90% non-condensing relative humidity at 35°C
• Physical Dimensions
• Card PCB dimensions: 113mm (4.46in) x 39mm (1.54in)
• Supported Platforms
• MicroCloud 8/10 node systems