US Dollars
United Arab Emirates Dirham
Euro
British Pound
Turkish Lira
Canadian Dollar
South African Rand
Indian Rupee
Brazilian Real
Indonesian Rupiah
Singapore Dollar
South Korean Won
Japanese Yen
Chinese Yuan
Mexican Peso
Qatari Rial
Saudi Riyal
Product Description
CLASS A HDBASET
Both the input and output side of this card offers HDBaseT 5-Play connectivity, passing AV, Control, Ethernet and PoH for both the RX and TX devices.
THE WYRESTORM ECO-SYSTEM
Used in line with WyreStorm’s range of HDBaseT devices, signals can be sent from single transmitters, switching transmitters or even presentation switchers to create a multi-layered switching environment.
ON-BOARD AUDIO DSP
No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, level trim and variable delay, which can be set per zone for a truly customized room-by-room balance.
4K UHD WITH HDR OVER HDBASET
Multi-zone transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native & uncompressed over long distances since the introduction of our first H2 extender in 2015. The H2X is no different and with the TX-H2X-HDMI, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 100m/328ft.
- HDBaseT Input – enables the direct connection of a remote source to the matrix via an HDBaseT Transmitter only at the source location, rather than an HDBaseT extender set previously required to distribute a remote signal over distance to a matrix. The matrix will then route the remote source signal as it does with any locally connected source
- HDBaseT Output – transmitting Class A HDBaseT which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
- HDMI Output – mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
- Stereo Audio Output – offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
- S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
- S/PDIF Audio Input – another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
- IR RX – allows control signals to be sent to the sink device
