Altronix IP and PoE+ over Extended Distance CAT5e or UTP Solution - 2 x Network (RJ-45) - 1640.42 ft Extended Range - PACE1PRMT

Altronix IP and PoE+ over Extended Distance CAT5e or UTP Solution - 2 x Network (RJ-45) - 1640.42 ft Extended Range

Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.

Applications:

• Extend Network link distance in an industrial environment over 700m
• Retrofit digital IP cameras in an analog CCTV CAT5e wired installations.
• Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

Features

• IEEE 802.3af (15W) and IEEE 802.3at (30W)
• Throughput is rated to pass 100Mbps
• Eliminates the costs and labor associated with installing new network cabling
• Retrofit digital IP cameras in an analog CCTV installation
• Auto detection and protection of legacy non-PoE cameras/devices
• Works with Megapixel, HD720, HD1080 & VGA (SD) cameras
• Extends Network link distance in an industrial environment
• Retrofit digital IP cameras in an analog CCTV CAT5e wired installations
• UL Listed in the U.S. and Canada
• CE Approved
• C-Tick Compliant
• Lifetime Warranty / Made in the U.S.A