Product Description
B+B SmartWorx Industrial Serial to Fiber Optic Converters - 2 x ST Ports - Multi-mode - 820 nm Fiber - 2.49 Mile - Power Supply - DIN Rail Mountable
Model BB-FOSTCDRI is a premium industrial serial to multi-mode fiber optic converter. Its rugged design is UL Approved and certified for Class 1/Division 2 industrial environments. It extends data communications up to 4 km (2.5 mi). It provides three-way optical isolation on the input, output and power lines.
In addition to direct point-to-point connectivity, it is capable of operating in a multi-drop mode. This allows one serial device to communicate with up to 31 other devices around a fiber ring. Since it supports mixed standards, you can replace other converters and isolators and add the EMI / RFI protection inherent to fiber optic communications.
In RS-232 mode, the converter supports Transmit and Receive data. Handshaking signals are not passed through. An Automatic Send Data Control circuit controls the RS-422/485 driver chip, eliminating the requirement for external software.
Easy to install and configure, it has a 12-position DIP switch on the bottom to configure RS-422/485 parameters. Serial data and power cables connect to removable terminal blocks. ST connectors are used for the fiber.
A 10-30 VDC external power source is required (power supply not included, sold separately).
Model BB-FOSTCDRI-INV features an "inverted fiber state" and is suitable for applications requiring the fiber optic transmit light to be Off in the idle state.
In addition to direct point-to-point connectivity, it is capable of operating in a multi-drop mode. This allows one serial device to communicate with up to 31 other devices around a fiber ring. Since it supports mixed standards, you can replace other converters and isolators and add the EMI / RFI protection inherent to fiber optic communications.
In RS-232 mode, the converter supports Transmit and Receive data. Handshaking signals are not passed through. An Automatic Send Data Control circuit controls the RS-422/485 driver chip, eliminating the requirement for external software.
Easy to install and configure, it has a 12-position DIP switch on the bottom to configure RS-422/485 parameters. Serial data and power cables connect to removable terminal blocks. ST connectors are used for the fiber.
A 10-30 VDC external power source is required (power supply not included, sold separately).
Model BB-FOSTCDRI-INV features an "inverted fiber state" and is suitable for applications requiring the fiber optic transmit light to be Off in the idle state.
Other Details
(Manufacturer Standard Warranty) - Not Clear what product you need, or can't find your specific product/service part number? Call us +1 888 988 5472 | Fax: +1 888 920 3445. You can also use the quote request page. Financing Options Available for all USA customersProduct Videos
Custom Field
Product Type Transceiver/Media Converter
Manufacturer Part Number BB-FOSTCDRI-INV
Maximum Distance Supported 2.49 Mile
Power Source Power Supply
Weight (Approximate) 7.04 oz
Form Factor DIN Rail Mountable
Manufacturer Advantech Co., Ltd
Product Model BB-FOSTCDRI-INV
Product Name Industrial Serial to Fiber Optic Converters
Power Consumption 1.30 W
Brand Name B+B SmartWorx
Plug/Connector Type Terminal Block
Height 4.8"
Width 4.4"
Depth 1.3"
Environmentally Friendly Yes
Environmental Certification WEEE
Environmental Certification RoHS
Fiber Optic Cable Standard 62.5/125 µm
Network (RJ-45) No
Number of ST Ports 2
Media Type Supported Optical Fiber
Fiber Mode Supported Multi-mode
Total Number of Ports 2
Fiber Optic Wavelength 820 nm
Note Images may not be exact, please check specifications.
Required A Volume Purchase Contact us for a volume pricing | volumeorders@hssl.us