KanexPro Flexible Matrix System Transceiver | Next Gen Modular Matrix - EXT-PROMATRIXUSB

Next Gen Modular Matrix System

The KanexPro SDVoE powered Modular Matrix system is the most versatile flexible video distribution solution. The system is composed of transceiver devices that can be configured as either video transmitters or receivers with a simple click of a mouse. The whole system is controlled and configured by a single control module which makes setup a snap.  

Transmitters and Receivers in One Device

The KanexPro Flexible matrix transceiver (EXT-PROMATRIXUSB) is an SDVoE IP powered encoder/decoder solution. Each transceiver features with one HDMI input and output, three USB 2.0, phoenix connectors for audio in and out and a LAN (Ethernet) port with RS-232 control port. The encoders use the advanced SDVoE technology to transmit full UHD 4K/60 video from HDMI based devices with lossless video and audio with absolutely zero latency. It supports POE (power over Ethernet) when connected with a POE network switch with distances over a single CAT6a up to 330 ft. (100m) delivering one to one, one to many and many to many over the 10G Ethernet switch.

Additionally, this unit supports matrix, video wall, picture in picture (PiP) and multiviewer modes when controller (EXT-PROCTRL) is connected to the network. The controller configures settings of all connected Transmitter/Receiver units, including IP address, netmask and extender status are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection or by directly connecting an HDMI display and USB keyboard & mouse to the control unit. A trigger input interface is also provided to allow the easy addition of a remote-control keypad, or other trigger-supporting devices, which can be installed within a podium or within a table in a conference room or classroom. This interface manages stored presets with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet, IR Remote and triggers.

Video Wall function & Multi-View

Create a NxN video wall or multi-view by adding multiple tranceivers to your application. They instantly display and have lossless video for critical video applications. They are all controlled by the central controller module and the web based GUI. 

A Central Control System for all your Switching & Controlling Needs (Sold Seperately)

The KanexPro Modular Matrix Controller (EXT-PROCTRL) is a powerful and flexible tool for controlling multiple transceivers within same network. Install this unit onto the same local network as the extenders to easily define and configure channel routing selections using the WebGUI. It is also possible to define and switch routes using customized groups or presets allowing for easy control over multiple video zones. Without the use of this controller, each individual Transmitter and Receiver pair could only be configured in a basic point-to-point operational mode. Compliant with HDCP, this controller should be combined with either of our tranceivers – EXT-PROMATRIX, EXT-PROMATRIXUSB offering a complete configurable ultra high quality video supporting resolutions up to 4K@60fps with Zero Latency. It’s a great solution for those looking to upgrade the traditional DVI/HDMI flexible matrix switchers.

Applications

Ideally used for digital signage in bars, restaurants, house of worship centers, large university campuses and in corporate AV signage, even high risk medical environments where sending high resolution, zero latency video and audio is critical.

• Video, Audio, LAN, IR and RS-232 over Ethernet extension
• Hotel or convention center displays
• Multi-monitor broadcasts
• Distributed video matrix system
• Distributed video wall system

Features