Product Description
Omnitron Managed Serial RS-232 to Fiber Media Converter - 1 x LC Ports - DuplexLC Port - Multi-mode - 3.11 Mile - DC MM 1310NM 5KM PLUG-IN WIDE TEMP
The Iconverter RS232 is a managed serial RS-232 to fiber converter that transmits serial protocol over fiber media. The RS232 media converters operate in pairs, extending serial distances over fiber up to 120km, which improves noise immunity from electrical and magnetic interference.The RS232 is available with a single-mode dual fiber, multimode dual fiber or single-mode single-fiber transceiver. The serial port interface is available with either a DB-9 female connector or terminal block connector for field wiring.
The RS232 automatically detects the signal data rate of the connected serial device, ranging from 110 bps to 921,600 bps. It also automatically adjusts to changes in the connected device's data rate during operation without reconfiguration or interruption of service.
Connection to DTE or DCE devices are configured by an easily accessible DIP-switch on the front-panel of the module. This feature eliminates the need to use a null-modem cable when connecting two serial devices of the same type.
A built-in Fiber Loopback DIP-switch provides easy validation of the entire fiber segment without interrupting fiber operations.
iConverter RS232 modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC or DC powered chassis.
The Iconverter Multi-Service Platform consists of Network Interface Devices, T1/E1 multiplexers, CWDM multiplexers and managed media converters that combine to deliver Carrier Ethernet and TDM services over fiber or CWDM wavelengths. This flexible architecture supports a wide variety of configurations for scalable and reliable fiber connectivity in Service Provider and Enterprise networks.
Features
- Managed Serial RS-232 to fiber media converter with automatic data rate detection
- Supports bit rates ranging from 110 bps to 921,600 bps
- Multimode, single-mode dual fiber with ST, SC and LC connectors, and single-mode single-fiber with SC connectors
- Supports distances up to 5km on multimode and 120km on single-mode
- DB-9 and Terminal Block connector options for serial RS-232 interface
- DIP-switch configuration of DTE or DCE device for easy connection to serial devices
- Supports RTS, CTS, DCD, DTR and DSR controls
- Remote fiber loopback switch for easy testing of fiber link, even during serial transmission
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- Management is available with the addition of a management module to the chassis
Other Details
(Manufacturer Standard Warranty) - Not Clear what product you need, or can't find your specific product/service part number? Call us +1 888 988 5472 | Fax: +1 888 920 3445. You can also use the quote request pageProduct Videos
Custom Field
Product Type Transceiver/Media Converter
Manufacturer Part Number 8766-0W
Maximum Distance Supported 3.11 Mile
Power Source DC
Limited Warranty Lifetime
Weight (Approximate) 8 oz
Manufacturer Omnitron Systems
Product Model 8766-0
Product Name Managed Serial RS-232 to Fiber Media Converter
Product Line iConverter
Brand Name Omnitron Systems
Country of Origin United States
Height 2.8"
Width 0.9"
Depth 4.5"
Environmentally Friendly Yes
Environmental Certification RoHS 2
Environmental Certification WEEE
Environmental Certification REACH
Fiber Optic Cable Standard 50/125 µm
Fiber Optic Cable Standard 62.5/125 µm
Number of LC Ports 1
Media Type Supported Optical Fiber
Fiber Mode Supported Multi-mode
Total Number of Ports 2
LC Port Type Duplex
Fiber Optic Wavelength 1310 nm
Note Images may not be exact, please check specifications.
Required A Volume Purchase Contact us for a volume pricing | volumeorders@hssl.us